TIPTEL 333 - Default Setting

Appendix
39
Default setting
You will see the tiptel 333's factory settings in the following list. You
can change these pre-sets individually. You can return to the default
setting at any time by going to the setup menu and selecting "basic
setting".
Language (E)
Talking cloc
k
Yes
Network cloc
k
No
Message length 2 mins
Listen live Yes
Number of rings before diverting to answering machine 2
Remote access code -
Remote access No
Message code -
Exchange identification code (telephone systems)
Display contrast (middle)
-
8
Message transfe
r
Destination number for message transfer
Announcement
Off
-
4 (fixed text)
On/off-state (when accepting calls) Off