TIPTEL 333 - Page 39

Appendix
38
No answer with
telecommunications
system
Telecommunications
system has no signal.
Check the
telecommunications
system's programming.
Buzzing or other
disturbance during
playback
Interference from e.g.
cordless telephones,
monitors etc.
Change the installation
location.
No incoming messages
are recorded
The device is set to a
non-recordable
announcement.
Change announcement
setting or record a new
one.
No incoming calls,
connected telephone not
working
Incorrect connection
cable, sockets
incorrectly wired.
Only use original cables
to check that the sockets
are working (you may
wish to call in a
technician).
No caller ID with
incoming call
Your network provider
or telecommunications
system does not support
this function or the
function is not activated.
The caller has hidden
his number or has an
x-directory number.
The call is from a public
telephone.
Ask your network
provider or tele-
communications system
manufacturer if the
function is available or
if it must be activated.
Wrong or no connection
when operated with a
telephone system.
You have not entered the
exchange identification
code, the telephone
system does not support
tone dialling.
Enter exchange
identification code.