Settings
33
Remote access ............. Yes or No. If you choose "Yes" and there
are new messages, your tiptel 333 will
answer a call after one ring (regardless of how you have configured
the answering machine). If there are no new messages, the device
will only answer a call after the set amount of rings. So you will know
if there are any new messages even before the call is answered.
Message code .............. The message code is a 1 to 4-digit
number from 0 to 9999. Switch off the
message function by setting the code
to " - ".
Exchange identifi-
cation code ..................
Here, you enter the identification code (only
for telephone systems) to access the public
telephone network (e. g. 0). This number
will then always be dialled automatically
before the telephone number. The code “–”
is used to turn this function off.
Contrast .......................... The display has 15 contrast levels.
Destination number ...... Here, you enter the phone number for
the message transfer (for example your
mobile number). A set number can be
deleted by pressing the selection button
next to “X”.
Basic setting .................. If you answer "Yes" to the confirmation
message, the device will return to the
default setting. All announcements and
settings will be deleted.
To Next Page
Loading...
