ENGLISH
ENGLISH
38
2
3
1
DANGER
ALL MAINTENANCE AND ADJUSTMENT OPERATIONS THAT ARE MARKED WITH (A) REQUIRE TECHNICAL MASTERY. FOR THIS REASON IT
IS IN THE INTEREST OF YOUR SAFETY TO HAVE THESE OPERATIONS CARRIED OUT EXCLUSIVELEY BY A SPECIALISED TM WORKSHOP
WHERE YOUR MOTORCYCLE WILL BE MAINTAINED IN AN OPTIMAL MANNER BY SPECIFICALLY TRAINED STAFF.
WARNING
- IF POSSIBLE, DO NOT USE HIGH PRESSURE JETS WHEN WASHING THE MOTORCYCLE BECAUSE THE WATER COULD PENETRATE INTO THE
BEARINGS, THE CARBURETOR, ELECTRIC CONNECTORS, ETC.
- WHEN TRANSPORTING YOUR TM, ENSURE THAT IT IS WELL-HELD IN A VERTICAL POSITION USING BELTS OR OTHER MECHANICAL FIXING
DEVICES AND ENSURE THAT THE FUEL TAP IS SWITCHED OFF. IF THE MOTORCYCLE SHOULD FALL, FUEL COULD ESCAPE FROM THE
CABURETOR OR TANK.
- TO FIX THE SHROUDS TO THE TANK ONLY USE THE SPECIAL SCREWS WITH THE CORRECT LENGTH OF THREAD FOR TM BIKES. IF YOU USE
DIFFERENT SCREWS OR LONGER SCREWS, THE TANK COULD BE DAMAGED WITH CONSEQUENT FUEL LEAK.
- DO NOT USE NOTCHED WASHERS OR SPRING WASHERS FOR THE ENGINE FASTENING SCREWS , BECAUSE THEY COULD PENETRATE INTO
PARTS OF THE FRAME AND LOOSEN CONTINUALLY. USE SELF-LOCKING NUTS.
- LEAVE THE MOTORCYCLE TO COOL BEFORE STARTING ANY MAINTENANCE. THIS WILL PREVENT BURNS.
- DISPOSE OF OILS, GREASES , FILTERS, FUELS, DETERGENTS, ETC. IN A REGULAR MANNER. COMPLY WITH THE RESPECTIVE REGULATIONS OF
YOUR COUNTRY.
- DISPOSE OF WASTE OIL IN A REGULAR MANNER ! NEVER POUR OLD OIL INTO DRAINS OR RIVERS.
CHECK OF STEERING BEARINGSCHECK OF STEERING BEARINGS
CHECK OF STEERING BEARINGSCHECK OF STEERING BEARINGS
CHECK OF STEERING BEARINGS
AND PLAAND PLA
AND PLAAND PLA
AND PLA
Y Y
Y Y
Y
ADJUSTMENT (A)ADJUSTMENT (A)
ADJUSTMENT (A)ADJUSTMENT (A)
ADJUSTMENT (A)
Periodically check the play of the steering bearings. For the check, lift
the front wheel and shake the fork forward and backwards. For
adjustment, loosen the four M8 screws (1) and nut (2) of the head of
the fork and act on the ring nut (3), tightening it until there is no more
play. Do not tighten the ring nut further to prevent damage to the
bearings. Tighten the fork head nut and successively the four M8 screws
to20 Nm.
Check for a smooth steering.
DANGER
IF THE STEERING BEARINGS DO NOT HAVE THE CORRECT CLEARANCE,
THE BEHAVIOUR ON THE ROAD WILL BE IRREGULAR AND YOU COULD
LOOSE CONTROL OF THE MOTORCYCLE.
WARNING
MAKING LONG JOURNEYS WITH INCORRECT STEERING BEARINGS
ADJUSTMENT, YOU RISK TO DAMAGE THE BEARINGS AND THEIR SEATS IN
THE FRAME.
The steering bearings should be re-greased at least once a year.
FRAME AND ENGINE MAINTENANCEFRAME AND ENGINE MAINTENANCE
FRAME AND ENGINE MAINTENANCEFRAME AND ENGINE MAINTENANCE
FRAME AND ENGINE MAINTENANCE
FRAME AND ENGINE MAINTENANCEFRAME AND ENGINE MAINTENANCE
FRAME AND ENGINE MAINTENANCEFRAME AND ENGINE MAINTENANCE
FRAME AND ENGINE MAINTENANCE
To Next Page
Loading...
Need help?
General
