Toa DP-0206 - Page 36

36
Delay
- The grouping number set for each channel is displayed on the grouping button. Clicking this
button enables you to set the grouping for each channel.
- The delay time for each channel is indicated as a numerical value on the Delay-time display
button. Clicking the button enables you to directly input the desired numerical value.
- The delay distance for each channel is indicated as a numerical value on the Delay-distance
display button. Clicking the button enables you to directly input the desired numerical value.
- By using the spin button you can increase or decrease the delay time by the smallest increment.
- Using the Increments selection switch, you can select the smallest increment for the delay time,
which can be used to make changes with the spin button.
- Clicking Options displays the dialog box below.
- You can select the distance-measuring unit displayed on the Delay-distance display button, from
among meters, inches, and feet.
- You can set the temperature used in the distance calculation displayed on the Delay-distance
display button.
Spin button
Increments selection switch
Local-grouping button
Options button
Delay-time display button
Delay-distance display button