37
Attn
- The grouping number set for each channel is displayed on the Grouping button. Clicking this
button enables you to set the grouping for each channel.
- By moving the Fader switches up or down, you can change the level for each channel.
- The level for each channel is indicated as a numerical value on the Level-display button for that
channel. Clicking the button enables you to directly input a numerical value. Using the spin button
on the right, you can move the numerical values up or down in increments of 0.5 dB.
- The Mute button displays the on/off status of the mute function for each channel. By clicking this
button you can switch this function on/off.
Fader
Grouping button
Level display button
Mute button
To Next Page
Loading...
