䕔
1-2
䕔
Precautions when installing the instrument and accessories
- Install the instrument in a location free of water or chemicals. Any water
or chemicals entering the instrument or devices may cause an electric
shock or failure.
- Do not install the instrument in a location where chemicals are stored
or gases may occur. Any chemicals or vapor entering the devices may
result in fire.
- Check that the frequency, voltage, and allowable current (or power
consumption) of the power source are appropriate. Otherwise, fire or
electric shock may occur.
- Do not place any heavy object on the AC cord or squash the power
cord. Fire or electric shock may occur.
- Fully insert the power plug into the outlet. Faulty contact, allowing any
metal to contact the exposed terminal of the plug, or dust accumulated
on the exposed terminal of the plug may result in fire or electric shock.
- Do not connect a device with data transmission specifications that are
not compatible. Fire or electric shock may occur. Contact Tomey
Corporation or our local distributor before using the instrument while
connected to another device.
- Install the instrument in a location not subject to direct sunlight, high
temperature and humidity, or air containing dust, salt, and/or sulfur.
Otherwise, failure or malfunction may occur.
- Install the instrument in a leveled stable location free of vibration or
mechanical impact. Otherwise, measurement cannot be conducted
correctly. Also, the instrument may topple over or fall down, resulting in
fire or a serious accident.
- Install the instrument in a location with ample clearance from other
devices to allow smooth inspection.
- Check that the frequency, voltage, and allowable current (or power
consumption) of the power source are appropriate.
- Check the power source (discharge condition, polarity, etc.).
To Next Page
Loading...
Need help?
General
