䕔
1-4
- Constantly observe that both the instrument and patient are free of
problems.
- If a problem with the instrument or the patient occurs, take appropriate
action, such as stopping the device, to ensure the patient’s safety.
- Do not allow the patient to touch the instrument.
- If any smoke, offensive odor, or abnormal sound occurs, turn off the
instrument immediately, disconnect the power plug from the outlet, and
contact our local distributor or Tomey Corporation.
䕔
Precautions after operation
- Do not place any container with liquid in it on the instrument. Any liquid
entering the instrument may cause electric shock or failure.
- Do not use organic solvents such as thinner, benzene, or acetone to
clean the instrument. Fire or electric shock may occur. (These solvents
may also corrode the resin or coating on the cover of the instrument.)
䠅
- Follow the specified procedures to return the operation switch, dial, etc.
to their original positions and turn the instrument off.
- Hold the plug when disconnecting the power plug from the outlet to
avoid placing excessive force on the cord. Pulling the cord may
damage the inner core wires, resulting in electric shock or fire.
- When disconnecting cords, do not apply too much force to them, for
example, do not hold and pull the cord.
- Refer to “5.6 Storing” for instructions on the storage of the instrument.
- Clean the instrument at the end of operation in preparation for the next
use.
- Clean and neatly arrange the accessories and cables.
To Next Page
Loading...
Need help?
General
