Tonghui TH1953 - Page 51

51
8.2.2.4 MEASure:DIODe?
Description: Configure the instrument to perform a diode measurement and immediately trigger the measurement
and send the measurement to the user. All other measurement parameters and trigger parameters are set to default
values.
Syntax: MEASure: DIODe?
Parameters: (none)
Example: MEAS: DIODe?
Typical response: +8.53210000E+00
8.2.2.5 MEASure:{RESistance|FRESistance}?
Description: Configure the instrument to perform a 2-wire resistance (RESistance) or 4-wire resistance
(FRESistance) measurement and immediately trigger the measurement to send the measurement results to the user.
All other measurement parameters and trigger parameters are set to default values.
Syntax: MEASure: {RESistance|FRESistance}? [{<range>|AUTO|MIN|MAX|DEF}]
Parameters: <range>:{10|100|1k|10k|100k|1MA|10MA|100MA }. Default: AUTO
Example: MEAS: FRES? 100
Typical response: +8.53210000E+01
8.2.2.6 MEASure:{FREQuency|PERiod}?
Description: Configure the instrument to perform frequency or period measurements and immediately trigger the
measurement to send the measurement to the user. All other measurement parameters and trigger parameters are
set to default values.
Syntax: MEASure: {FREQuency|PERiod}? [{<range>|AUTO|MIN|MAX|DEF}]
Parameters: <range>:{100m|1|10|100|750}. Default: AUTO
Example: MEAS: FREQ? 10
Typical response: +1.4527800E-04
8.2.2.7 MEASure:TEMPerature?
Description: Configure the instrument to perform temperature measurement and immediately trigger the
measurement to send the measurement to the user. All other measurement parameters and trigger parameters are
set to default values.
Syntax: MEASure: TEMPerature? [{FRTD|RTD|FTHermistor|THERmistor}]
Parameters: <probe_type>: FRTD|RTD|FTHermistor|THERmistor.
Example: MEAS:TEMP? RTD
Typical response: +8.53210000E+1