Tonghui TH1953 - System Subsystem - I;O Configuration

65
8.2.9.2 [SENSe:]CAPacitance:RANGe:AUTO
Description: Enable or disable autoranging for capacitance measurements
The autoranging range can be adjusted down to less than 10% of the range and can be adjusted upwards to more
than 120% of the range.
Syntax: [SENSe:] CAPacitance:RANGe:AUTO {ON|OFF}
[SENSe:] CAPacitance: RANGe: AUTO?
Parameters: {ON|1|OFF|0}
Example: CAP: RANG: AUTO ON
8.2.9.3 [SENSe:]CAPacitance:SECondary
Description: Select an auxiliary measurement function for the capacitance measurement.
Please use DATA2? to read auxiliary measurement results.
Syntax: [SENSe:] CAPacitance:SECondary {OFF|BEForemath}
[SENSe:] CAPacitance: SECondary?
Parameters: {OFF|BEForemath}
Example: CAP BEF
8.2.10 SYSTem Subsystem - I/O Configuration
8.2.10.1 SYSTem:COMMunicate:RS232:BAUDrate
Description: Set the serial port baud rate
Syntax: SYSTem:COMMunicate:RS232:BAUDrate {4800|9600|19200|38400|57600|115200}
SYSTem:COMMunicate:RS232:BAUDrate?:
Parameters: Supported baud rate: {4800|9600|19200|38400|57600|115200}
Example: SYST:COMM:RS232:BAUD 9600
8.2.10.2 SYSTem:COMMunicate:RS232:DATAbits
Description: Set serial data bits.
Syntax: SYSTem:COMMunicate:RS232:DATAbits {7|8}
SYSTem:COMMunicate:RS232: DATAbits?:
Parameters: Supported data bits: {7|8}
Example: SYST:COMM:RS232:DATA 8
8.2.10.3 SYSTem:COMMunicate:RS232:PARity
Description: Set the serial port parity bit.
Syntax: SYSTem:COMMunicate:RS232:PARity {EVEN|ODD|MARK|SPACE|NULL}
SYSTem:COMMunicate:RS232:PARity?: