Tonghui TH1953 - Page 66

66
Parameters: Check method: {EVEN|ODD|MARK|SPACE|NULL}
Example: SYST:COMM:RS232:PAR NULL
8.2.10.4 SYSTem:COMMunicate:RS232:STOPbits
Description: Set the serial port stop bit.
Syntax: SYSTem:COMMunicate:RS232:STOPbits {1|2}
SYSTem:COMMunicate:RS232:STOPbits?
Parameters: Serial port stop bit: {1|2}
Example: SYST:COMM:RS232:STOP 1
8.2.10.5 SYSTem:COMMunicate:LAN:DNS{1|2}
Description: Set the DNS server address.
Syntax: SYSTem:COMMunicate:LAN:DNS{1|2} {<address>}
SYSTem:COMMunicate:LAN:DNS{1|2}?
Parameters: Address
Example: SYST:COMM:LAN:DNS1 "192.168.1.4"
8.2.10.6 SYSTem:COMMunicate:LAN:GATeway
Description: Set the default route for the instrument.
Syntax: SYSTem:COMMunicate:LAN:GATeway {<address>}
SYSTem:COMMunicate:LAN:GATeway?
Parameters: Address
Example: SYST:COMM:LAN:GAT "192.168.1.5"
8.2.10.7 SYSTem:COMMunicate:LAN:HOSTname
Description: Set the host name of the instrument.
Syntax: SYSTem:COMMunicate:LAN:HOSTname {<name>}
SYSTem:COMMunicate:LAN:HOSTname?
Parameters: Defined hostname
Example: SYST:COMM:LAN:HOST “LAB1-DMM”
8.2.10.8 SYSTem:COMMunicate:LAN:IPADdress
Description: Set the IP address.
Syntax: SYSTem:COMMunicate:LAN:IPADdress "<address>"
SYSTem:COMMunicate:LAN:IPADdress?
Parameters: IP address
Example: SYST:COMM:LAN:IPAD "192.168.1.242"