71
CALCulate:SCALe:FUNCtion?
Parameters: Selected operation: {DB|DBM|PCT|SCALe}
Example: Enable the DB calibration function for the next measurement reference:
CALC: SCAL: FUNC DB
CALC: SCAL: STAT ON
8.2.14.4 CALCulate:SCALe:GAIN
Description: Sets the gain value M of the calibration function in CALCulate:SCALe:FUNCtion.
Syntax: CALCulate:SCALe:GAIN {<gain>}
CALCulate: SCALe: GAIN?
Parameters: gain
Example: CALC: SCAL: GAIN 100
8.2.14.5 CALCulate:SCALe:OFFSet
Description: Sets the offset value B of the calibration function in CALCulate:SCALe:FUNCtion.
Syntax: CALCulate:SCALe:OFFSet {<offset>}
CALCulate:SCALe:OFFSet?
Parameters: offset
Example: CALC: SCAL: OFFSet 5
8.2.14.6 CALCulate:SCALe:REFerence
Description: Sets the reference value for the PCT function in CALCulate:SCALe:FUNCtion.
Syntax: CALCulate:SCALe:REFerence {<reference>}
CALCulate: SCALe: REFerence?
Parameters: reference
Example: CALC: SCAL: REF 100
8.2.14.7 CALCulate:SCALe:REFerence:AUTO
Description: Enable or disable the automatic reference selection for the dB calibration function.
Syntax: CALCulate:SCALe:REFerence:AUTO {ON|1|OFF|0}
CALCulate: SCALe: REFerence: AUTO?
Parameters: {ON|1|OFF|0}
Example: CALC: SCAL: REF: AUTO ON
8.2.14.8 CALCulate:SCALe[:STATe]
Description: Enable or disable the calibration function
Syntax: CALCulate:SCALe[:STATe] {ON|1|OFF|0}
To Next Page
Loading...