Topcon 3D-MC - Page 24

Entering Sensor Information
3-5
P/N: 7010-1006
Machine Setup and Configuration
6. Select MC-i3/MC-i4 for Sensor Input (Figure 3-4).
7. Tap Next to navigate to the Wheel Loader Antenna screen, and select/enter the appropriate
values as needed.
Figure 3-5: Wheel Loader Antenna
8. Tap Next to navigate to the Wheel Loader Antenna (Aux) screen, and select/enter the
appropriate values as needed (Figure 3-5).
Figure 3-6: Wheel Loader Antenna (Aux)