5
STARTUP AND SETTING OF Ez Capture for DC-4
STARTUP AND SETTING OF Ez Capture for DC-4
Getting started
To activate Ez Capture, click on the " Start" on the Windows desktop, click "All Programs" and then
click "TOPCON EzCapture"-"EzCapture" on the Menu. Or double-click the shortcut icon of [Ez Cap-
ture] shown in "Ez Capture icon" on the desktop to start Ez Capture.
Startup Screen
Ez Capture is started and the following startup screen is displayed. The startup screen may be cus-
tomized by setting. Refer to "Setup of Ez Capture". In the factory setting, the "Slit", "View" and "Exit"
icons are displayed in portrait orientation.
NOTES
• Log in Windows with a user ID of administrator authority. Ez Capture for DC-4
requires administrator authority.
• For using Ez Capture for DC-4, please set off the sleep function of Windows.
If Windows gets to sleep while Ez Capture is working, there is a possibility that
unexpected problems may occur after resuming from sleep.
If Windows gets to sleep, please restart the computer.
NOTES
When starting Ez Capture, the message "Ez Capture or Ez Capture Configura-
tion is starting" is sometimes displayed. In this case, check if Ez Capture or Ez
Capture Configuration has already started. If each of them does not start yet,
restart the computer. Then, restart Ez Capture.
To Next Page
Loading...
Need help?
General
