Topcon DIGISTAR TMR4610 - Page 55

D4208-EN TMR4610 Operators Manual 55
SETTING
[display]
D.A.N.
NO.
OPTIONS [displayed]
BOLD=DEFAULT
DESCRIPTION
RANGE TEST
(R-TEST)
6216
OFF, ON
If ON –Feed-lines sent from
Data-Link are marked "done".
Valid when using Data-Link
System.
AUTO START PENS
(AUTPEN)
6217
OFF, ON
If ON -Starts Pens List after
Recipe is loaded.
FEED ZONE
(FDZONE)
6218
ALL, 1, 2, 3, 4, 5, 6, 7, 8, 9
Select feed zone for recipe
deliveries.
PARTIAL FEEDING
(PARTFD)
6219
OFF, ON
If ON –Partial feedings will be
Recorded.
MIMIC TYREL
(TCI300)
6221
OFF, ON
If ON - Records preset
weights like a Tyrel TCX-
1300 Indicator.
PEN CHECK
METHOD
{PCMTHD}
6222
WEIGHT, PERCENT
Select weight or percentage
method for pen check option.
PEN CHECK
{PENCHK}
6223
30
Enter value to verify if pen
has been underfed. Set to “0”
to disable.
PEN STARTED
WEIGHT
{PSTART}
6224
60
This weight threshold
determines if the pen has
been started.
MENU 8.0 – SIGN-ON & MAINTENANCE MESSAGES
SIGNON SETTING
(SIGNON)
8001
OFF, ON
Enables continuous display of
sign-on message
SIGNON MESSAGE
(SIGMSG)
8002
SIGMSG 1,2,3
Enables editing of the sign-on
message
MAINTENANCE
MESSAGE
(MANTMG)
8011
MANTMG 1, 2, 3, 4, 5, 6, 7, 8, 9,
10
Enables editing of the
maintenance message
MAINTENANCE
MESS. TIME
(MANTTM)
8012
200, Time is entered using key
pad.
Time for maintenance
message to be triggered.
MAINTENANCE
MESS. CLEAR
{MANCLR}
8013
Allows for clearing of
maintenance message time
or entry of new time.