Topcon DIGISTAR TMR4610 - Page 56

56 TMR4610 Operators Manual D4208-EN
SETTING
[display]
D.A.N.
NO.
OPTIONS [displayed]
BOLD=DEFAULT
DESCRIPTION
MENU 8.1 – CALIBRATION
DEAD WEIGHT CAL
(WT CAL)
8121
Follow instructions shown on LCD
Calibration method using
weights
TEMPERATURE
CALIBRATION
(T CALB)
8123
OFF/ON
On=Scale adjusts for
temperature changes
CALIBRATION
MATCH
(CAL MAT)
8124
ENTER KNOWN WEIGHT
Calibration method used for
matching a known weight.
MENU 8.2 – MEMORY MANAGEMENT
CLEAR
MEMORY/REUSE
8201
Clears feedline memory = ON
key or Reuse feedlines =
CLEAR key.
CLEAR NVRAM
8202
Reset all internal data storage
values stored in non-volatile
memory. (TMR)
MENU 8.7 – SETUP NUMBER AND SETTINGS
SETUP NUMBER
(SETUP)
8711
146040
Quick entry method selects
weigh method 1-4lbs, 5-8 kg,
gain 1-9, display counts 1-9
and capacity *1000
Calibration
Number
(CAL)
8712
32640
Weight displayed at 0.4mV/V
SYSTEM DATE
FORMAT
(SYSDTF)
8719
Allows date format to be
changed when printing stored
records.
CALIBRAION
MATCH
(CALMAT)
8724
Allows adjustment to the
calibration number by
inputting two weight values.
DISPLAY POOL
STATUS
(D POOL)
8733
Show/Display pool status in
internal memory