Topcon PixelChart PC-50S - Before Use; Standard Components; Optional Accessories

11
BEFORE USE
BEFORE USE
STANDARD COMPONENTS
The table below shows the standard components. Make sure that you have all of the components.
The numerical value in ( ) shows the quantity. If one of the standard components is not included in the
package, contact your dealer or TOPCON office (listed in the back cover).
 Use this part only when using the wall-mounting metal fixture to install the PixelChart.
 Use this part only when installing the wireless unit.
OPTIONAL ACCESSORIES
The service engineer will connect the optional accessories. When you purchase the optional
accessories, contact the service engineer.
• Image cable : This should be connected to CV-5000.
• Floor stand : This stand should be placed on the floor.
Instruction manual (1) Power cord (1) AC adapter (1)
Dust cover (1) Wall-mounting metal fixture (1) Wooden screw for fixing the
wall-mounting metal fixture (4)
Wall-mounting screw (4) Clearance ring (5)
(One of them is a spare.)
Screw for the wireless unit
(commercial product) (2)
Spacer for mounting the
wireless unit (2)
INSTRUCTION MANUAL
PixelChart
PC-50





