EasyManua.ls Logo

Topcon SL-D301 - MAINTENANCE AND CHECKUPS - PART 4

Topcon SL-D301
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
MAINTENANCE AND CHECKUPS
DAILY CARE
CLEANING APPLIED PARTS
Wipe the forehead rest, the chinrest with a cloth moistened with a tepid solution of neutral detergent
for kitchenware.
CLEANING LENSES AND MIRRORS
REMOVING STAINS
1 Prepare a solution of ethyl alcohol 20% and ether 80%.
2 Remove dust from lens and mirror surfaces with the cleaning brush, or a blower.
3 Using clean gauze or lint-free tissue, lightly clean with a rotating movement from the center of the
lens/mirror outwards.
4 If the stain remains, repeat this 2 to 3 times.
5 If stains are persistent, call your dealer or TOPCON (see the back cover).
CAUTION
Before carrying out daily care, remove the power cord (to avoid elec-
tric shocks) and wait until the lamp house has cooled (to avoid burns).
Do not touch parts inside the lamp house cover during operation and
immediately after switching off the power supply: this could cause burns.
NOTE
To prevent the chinrest, forehead rest and other plastic parts from discolora-
tion and deterioration, do not use volatile solvents for cleaning, including ben-
zine, thinner, ether, gasoline, etc.
Wipe parts with a cloth moistened with a tepid solution of neutral kitchen detergent.
NOTE
To prevent damaging lens surfaces, do not hold gauze with tweezers.

Table of Contents

Related product manuals