Topcon Synergy GM-50 series User Manual

9-8
9 MEMORY MANAGER MODE
9.3.1 Rename a File
An existing file in internal memory can be renamed.
9.3.2 Searching Data in a File
An existing file in internal memory can be searched.
Operating procedure Operation Display
1 Press the {F3} (FILE MAINTAN.) key from the
Memory manager menu 1/3.
{F3}
2 Select a file by pressing {} or {} key.
{} or {}
3 Press the {F1} (REN) key.
{F1}
4 Enter new file name.
Press the {F4} (ENT) key. *1)
Enter FN
{F4}
*1)
Refer to Section 2.4 “How to Enter Alphanumeric Characters”.
Existing file name can not be available.
To return to the FILE MAINTAN. Menu, press the {ESC} key.
Operating procedure Operation Display
1 Press the {F3} (FILE MAINTAN.) key from the
Memory manager menu 1/3.
{F3}
2 Select a file to search by pressing {} or {}
key.
{} or {}
3 Press the {F2} (SRCH) key.
{F2}
4 Select searching method by pressing the {F1} to
{F3} key. *1)
{F1} to {F3}
*1) Because procedures from next are same as procedures of Section 9.2 “Searching Data”, refer to
Section 9.2 “Searching Data”
To return to the FILE MAINTAN. Menu, press the {ESC} key.
→ MEASD1 /M0123
COORD1 /C0056
REN SRCH DEL –––
MEASD1 /M0123
→ COORD1 /C0056
COORD2 /C0098
REN SRCH DEL –––
MEASD1 /M0123
=COORD1 /C0056
COORD1 /C0098
[ALP][SPC][CLR][ENT]
MEASD1 /M0123
→ COORD5 /C0056
COORD1 /C0098
REN SRCH DEL –––
→ MEASD1 /M0123
COORD1 /C0056
REN SRCH DEL –––
MEASD1 /M0123
→ COORD1 /C0056
COORD2 /C0098
REN SRCH DEL –––
SEARCH [COORD1 ]
F1:FIRST DATA
F2:LAST DATA
F3:PT# DATA

Topcon Synergy GM-50 series Specifications

General

Brand	Topcon
Model	Synergy GM-50 series
Category	Measuring Instruments
Language	English