Topcon Synergy GM-50 series - Compasses (Vertical Angle)

3-5
3 ANGLE MEASUREMENT
3.7 Compasses (vertical angle)
Vertical angle is displayed as shown below.
3 Press the {F1} (ON) key or {F2} (OFF) key to
select the buzzer ON/OFF.
{F1}
or
{F2}
4 Press the {F4} (ENTER) key.
{F4}
Operating procedure Operation Display
1 Press the {F4} ( ↓ ) key twice to get the function
on page 3.
{F4}
twice
2 Press the {F3} (CMPS) key. *1)
{F3}
*1) Every time pressing the {F3} (CMPS) key, the display mode switches.
H-ANGLE BUZZER [ON]
[ON] [OFF] --- ENTER
V : 90°10'20"
HR: 170°30'20"
0SET HOLD HSET P1
↓
+90°
-90°
0°
0°
V : 98°10'20"
HR: 170°30'20"
0SET HOLD HSET P1
↓
H-BZ R/L CMPS P3 ↓
V : - 8°10'20"
HR: 170°30'20"
H-BZ R/L CMPS P3
↓