9-16
9 MEMORY MANAGER MODE
9.7.2 Loading Data
Coordinate data files and PCODE Library data can be loaded from PC.
Example: Loading a coordinate data file (from PC)
Operating procedure Operation Display
1 Press the {F3} (MEMORY MGR.) key from the
menu 1/3.
{F3}
2 Press the {F4} (P
↓
) key twice.
{F4}
{F4}
3 Press the {F1} (DATA TRANSFER) key.
{F1}
4 Press the {F2} (RS-232C) key.
{F2}
5 Press the {F4} (ENTER) key.
{F4}
6 Press the {F1} (GTS FORMAT) key.
{F1}
7 Press the {F2} (LOAD DATA) key.
{F2}
8 Select the type of data to load by pressing
{F1} or {F2} key.
Example: {F1} (COORD. DATA)
{F1}
9 Enter New File Name you want to receive. Press
the {F4} (ENT) key. *1)
Enter FN
{F4}
10 Press the {F3} (YES) key.*2)
The loading starts.
The display will return to menu.
{F3}
*1)
Refer to Section 2.4 “How to Enter Alphanumeric Characters”.
*2) To cancel the loading, press the {F4} (STOP) key.
MEMORY MGR. 1/3
F1:FILE STATUS
F2:SEARCH
F3:FILE MAINTAN P
↓
MEMORY MGR. 3/3
F1:DATA TRANSFER
F2:INITIALIZE
P
↓
SELECT COM
[F1:BLUETOOTH]
F2:RS-232C
F3:USB ENTER
DATA TRANSFER
F1:GTS FORMAT
F2:SSS FORMAT
DATA TRANSFER
F1:SEND DATA
F2:LOAD DATA
F3:COMM. PARAMETERS
LOAD DATA
F1:COORD. DATA
F2:PCODE DATA
COORD. FILE NAME
FN=_________
[ALP][SPC][CLR][ENT]
LOAD COORD. DATA
>OK ?
––– ––– [YES][NO]
LOAD COORD. DATA
< Loading Data!>
STOP
To Next Page
Loading...
