Topcon Synergy GM-50 series - Data Communications; Sending Data

9-14
9 MEMORY MANAGER MODE
9.7 Data Communications
You can send a data file stored in the internal memory to a computer directly. Also, you can directly load
a coordinate data file and PCODE Library data to the internal memory from the computer.
9.7.1 Sending Data
Example: Sending a Measured data file
Operating procedure Operation Display
1 Press the {F3} (MEMORY MGR.) key from the
menu 1/3.
{F3}
2 Press the {F4} (P ↓ ) key twice.
{F4}
{F4}
3 Press the {F1} (DATA TRANSFER) key.
{F1}
4 Press the {F2} (RS-232C) key.*1)
{F2}
5 Press the {F4} (ENTER) key.
{F4}
6 Select data format.
GTS format: The conventional data
SSS format: Including PCODE data, ‘From’ and
‘To’ data for Point to Line.
{F1}
7 Press the {F1} (SEND DATA) key.
{F1}
8 Select the type of data to send by pressing {F1}-
{F3} key.
Example: {F1} (MEAS. DATA)
{F1}
9 Press the {F1} (INPUT) key and enter File Name
you want to send. Press the {F4} (ENT) key.
*2),3),4)
{F1}
Enter FN
{F4}
MEMORY MGR. 1/3
F1:FILE STATUS
F2:SEARCH
F3:FILE MAINTAN P
↓
MEMORY MGR. 3/3
F1:DATA TRANSFER
F2:INITIALIZE
P
↓
SELECT COM
[F1:BLUETOOTH]
F2:RS-232C
F3:USB ENTER
DATA TRANSFER
F1:GTS FORMAT
F2:SSS FORMAT
DATA TRANSFER
F1:SEND DATA
F2:LOAD DATA
F3:COMM. PARAMETERS
SEND DATA
F1:MEAS. DATA
F2:COORD. DATA
F3:PCODE DATA
SELECT A FILE
FN:_________
INPUT LIST ––– ENTER
SEND MEAS. DATA
>OK ?
––– ––– [YES][NO]