3-2
www.topconpa.com
System 150 Auto Steer Setup Guide
Figure 3-3. Drive in a circle
Figure 3-4. Stop the vehicle
3
4
Next you will be asked to drive in a circle for one and a half 3.
revolutions. Maintain a low speed while you are doing this. Select
next once you have completed this step
Stop the vehicle when prompted and select next. If the calibration is 4.
successful it will be stated on the screen
Select the green tick to return to to the 5. Auto-steer Setup screen
To Next Page
Loading...
Need help?
General
