4
4.2 Video and audio settings 23
4.2.3 Colour format
Through the TV SCART output, the digital receiver is able to
output video in various colour formats. If you have the digital
receiver linked to your television via this output, you should
set the Video Output option to your desired colour format.
If you have connected via the RCA socket labeled VIDEO on
the back panel, you do not have to set this option because the
digital receiver outputs CVBS video through that RCA output
independently of the SCART output.
In general, it is known that the RGB colour format provides the
best video quality but the CVBS colour format does the least.
So RGB would be the most desirable option for this.
4.2.4 Another video device
You can have the digital receiver linked to another video de-
vice like a video recorder or a DVD player via the VCR SCART
output. In this case, the digital receiver will operate differ-
ently depending on the setting of the VCR SCART Type op-
tion. If the option is set to Standard, the digital receiver will
pass along the video from the video device to your television
when it starts playback. But if the option is set to External A/V,
the digital receiver will not pass the video automatically. You
have to press the
AUX button to pass it along. It is impossi-
ble for the digital receiver to record the video from the video
device since the digital receiver is just a bypass for the video
recorder.
NOTE
When the digital receiver is in standby mode, the digital re-
ceiver cannot pass the video from the video device to the
television when it starts playback.
To Next Page
Loading...
