44 Recording and Playback
To stop recording, press the
button, then a box like the left
figure appears, showing the
programmes currently being
recorded. If you select one, its
recording will stop.
Once a recording is started, it is put on the recorded pro-
gramme list even though it is not finished yet. The recording
file is named after its service name with a suffix of a number.
To view the recorded programme list, press the button. See
§7.2 for detailed description about the recorded programme
list.
7.1.2 Timer recording
You can make your desired service to be recorded at a specific
time. Even if the digital receiver is in standby mode, it will
switch into active mode and start recording at a specified time.
When the recording comes to the end, the digital receiver will
switch back into standby mode again after one minute.
Select the Timer Setting menu,
then the timer list will be dis-
played. To add a new timer
event, press the button, then
an option box pops up. Take the
following steps:
To Next Page
Loading...
