46 Recording and Playback
You can also edit or delete timer events in the timer list. To edit
a timer entry, put the highlight bar on the entry you want and
press
OK button, then pops up the option box in which you
can change its settings in the same manner as making a new
one.
To delete a timer event, put the highlight bar on the entry you
want to remove and press the button, then you get asked
for confirmation. With the choice of Yes, it will be deleted.
If you’ve made timer events from the electronic programme
guide, they will be also displayed in the timer list. In that
case, you can edit or delete them in the same manner described
above.
NOTE
Do not operate the digital receiver while it is working on a
timer event. If you press any key on the remote control or on
the front panel, it will not turn off automatically even after
the timer event is complete.
7.1.3 Scheduling recordings using the programme guide
If the electronic programme
guide is properly provided,
you can make timer events on
it. The instructions on how to
make timer recordings using the
electronic programme guide are
as follows:
1. Press the
GUIDE button to display the electronic pro-
gramme guide.
To Next Page
Loading...
