24 Operation
RF Type
When the STB is connected to the TV by an RF cable, you may
need to select the correct TV standard system. Select the PAL
G, PAL I, PAL K, NTSC M mode by using
¤
£
¡
¢
V− ,
¤
£
¡
¢
V+ buttons.
RF Channel
Select a RF channel by using
¤
£
¡
¢
V− ,
¤
£
¡
¢
V+ buttons. The default RF
channel is CH36. When you change the RF channel number,
you must also change to the same value on the TV. If you do
not, there will be no picture and sound.
4.2.6 OSD Transparency
Adjust the OSD transparency of all the menus. The available
levels are ranging from 0% to 50%.
4.2.7 Info Box Display Time
Adjust the time-out of the information box. Set the period of
time that the infomation box is displayed on screen. The ad-
justable time is 0 to 30 seconds, No info box and Never Hide.
To Next Page
Loading...
Need help?
General