4.5 Installation 35
Motorized DiSEqC 1.3
Select Enable or Disable. If you are using DiSEqC 1.3 switch,
set to Enable.
Satellite Name
Select a satellite that will be used to identify a motor system.
Satellite Angle
It is the longitude of the selected satellite and it can be set au-
tomatically in case of selecting a satellite name. You can use
numeric keys of RCU to enter the angle. East or West will be
selected by
¤
£
¡
¢
V− ,
¤
£
¡
¢
V+ button.
My Longitude
It means the longitude of your location. You can select the
angle, East and West by
¤
£
¡
¢
V− ,
¤
£
¡
¢
V+ or numeric button.
My Latitude
It means the latitude of your location. You can select the angle,
South or North by
¤
£
¡
¢
V− ,
¤
£
¡
¢
V+ or numeric button.
To Next Page