38 Operation
Add New TP
In case of new transponder information is added by broad-
caster, you can add new TP(transponder) information and en-
joy new services. Before adding new TP information, you
should know the frequency, symbol rate and polarization types.
After adding new information, you should confirm the new
information by pressing
¤
£
¡
¢
OK button at OK item.
Delete TP
By selecting this item, you can delete the selected TP(Transponder)
information.
Add Satellite
Using this menu, you can add new satellite name by keyboard,
then it will be added in the Satellite Name menu.
Delete Satellite
By selecting this item, you can delete the selected satellite in-
formation.
Service Search
It is used to go to Service Search menu directly from SAT/TP
Edit menu.
To Next Page