2 Setup
2.4 Connecting up your digital receiver 9
NOTE
Remember to plug in the additional white and red audio cables from
the digital receiver to the back of your television.
To use the Composite video output
You need to obtain a Composite video cable (RCA cable)
to use the Composite video output. Plug one end of the
cable into the VIDEO (yellow) socket on the digital receiver,
and plug the other end into the matching socket on your
television.
NOTE
You cannot view high definition video by means of the Composite
video output.
To make the audio connection
You need to obtain an audio cable (RCA cable) to link the
audio connectors. Plug one end of the cable into the AUDIO
L (white) and AUDIO R (red) sockets on the digital receiver,
and plug the other ends into the matching sockets on your
television or audio-video receiver.
To enjoy Dolby Digital audio, your television or audio-
video receiver must be able to decode Dolby Digital audio,
and you need to obtain a S/PDIF cable.
Plug one end of the cable into the S/PDIF socket on the
digital receiver, and plug the other end into the matching
socket on your audio-video receiver.
To Next Page
