38 Recording and Playback
7.3 Playing back a recording
When a programme is recorded, its additional contents such as audio
track or subtitle track are also recorded together. So you can enjoy
them while playing back a recording.
The instructions on how to play a recording are as follows:
1. Select the PVR > Recorded Program menu or alternatively
press the button to display the list of recorded programmes.
2. Put the highlight bar on a desired recording and press the
OK
button, then an option box pops up.
3. To play from beginning, set the Starting Position option to Be-
ginning; to play from the point that you have stopped at the last
time, set it to Continuing. To start playback, select the Play item.
4. To stop playback, press the button.
During playback, you can enjoy the following tricks:
• To see the detailed information about the currently played
recording, press the button; then the information box ap-
pears and shows its file name, running time, programme infor-
mation, and so on.
• To pause playback, press the button. To resume it, press the
button.
• To view the progress bar, press the button; to hide it, press
the button again.
• When the progress bar is hidden, you can move to a desired
scene by entering a progress percentage with the numeric but-
tons.
7.3.1 To navigate using the progress bar
First press the button to display the progress bar.
• To go forward, hold down the button; to go backward, hold
down the button.
• If there are no bookmarks, you can jump forward by the minute
set to the Jump time Interval option with the
F3 button. See
§4.5 for that option. Refer to §7.3.4 as to how to bookmark a
position.
• To jump to the beginning, press the button.
• To jump to the end, press the button.
• To hide the progress bar, press the button again.
To Next Page
