8 Accessing via Network
41
Chapter 8
Accessing via Network
NOTE
The following section describes complex functions that should only
be used by owners with advanced computer knowledge.
This digital receiver provides features of web service and FTP service,
by which through the network you can make scheduled recordings, or
transfer recording files to your computer.
Here you need a router, which will connect the digital receiver to your
computer or to the Internet. If you want to have a wireless connection,
you need a wireless router.
To use the network features of the digital receiver, you should take the
following steps:
1. Configuring your router for the digital receiver.
2. Configuring the network settings on the digital receiver.
3. Accessing the home page of the digital receiver. Refer to §8.3 for
detailed description about things you can do by using the web
service of the digital receiver.
4. Accessing the FTP Server of the digital receiver.
NOTE
The web server and FTP server of the digital receiver do not work in
standby mode. So it must be powered up at all times if you wish to
use the web service at any time.
To Next Page
