Topwisdom TL-410 - Part 4 Software Operation Guide; 4.1 CorelDRAW Direct Output Software Operation

泰智科技
Shenzhen Topwisdom Technology Co., Ltd
33
Part 4 Software Operation Guide
4.1 CorelDRAW Direct Output Software Operation
Open the CorelDRAW software, show as Fig. 4-1
Fig. 4-1After startup, our processing buttons will be automatically mounted on the
menu shown in Fig. 4-1 as pointed out by the arrow. After completing the figure, we
can click on the ―Laser Carve‖ button as pointed out by the arrow in Fig. 4-1 to show
the menu in Fig. 4-2.
Fig. 4-2