Topwisdom TL-410 - Single Axis Movement Interface; File Selection Interface

泰智科技
Shenzhen Topwisdom Technology Co., Ltd
69
5.2.6 Single Axis Movement Interface
After initialization, press ―Axis‖ key, show as:
Middle
NO
0
0
0
Run
2 I f L a s e r O n.
1 K e y S p e e d.
3 X A x i s S e t t i n g.
4 Y A x i s S e t t i n g.
5 U A x i s S e t t i n g.
返回ESC
Fig. 5-7
Press the ―Up/Down‖ key to choose the needed operation:
 Key Speed: fast, middle, slow.
 If Laser On: Yes or No.
 X Axis Setting: Press ―Right/Left‖ key to move X axis, when stop, it’ll show the
current coordinate. The other axis operation is similar.
When If Laser On parameter is set as Yes, it uses the system default power to cut. No
selecting file and press Power button to modify the system default power.
5.2.7 File Selection Interface
Press ―Menu‖ key into the main menu, and select the Memory File button. Also can
directly press ―File‖ to enter, show as: