Instructions for Use T-1929 e 3
1 General Information
1.1 Target Groups
• Operator of the automatic door. The operator is the person responsible for the operation and main-
tenance of the system.
• Persons instructed by the operator to carry out certain duties, for example the servicing and main-
tenance of the automatic sliding door.
1.2 Storage and Forwarding of the Manual
• Store the instructions for use in the vicinity of the automatic door system.
• If the manual has become illegible due to constant usage, reorder the instructions or download from:
www.tormax.com
• When the door system is transferred or resaled to a third party, pass the following documents to the
new owner:
– This instructions for use
– Documentation concerning modification and repair work
– Proof of the regular examinations System test book T-879
1.3 Area of Application
Product name, door system: Automatic sliding door
Product name, door drive: TORMAX 2203 Sliding Door Drive
TORMAX 2203.HB Sliding Door Drive
The drive name is indicated in an abbreviated form in the Instructions.
The door drives are defined in more detail by a 4-figure number:
Identification plate with the serial number:
located on the drive.
Door system identification plate (example):
located on the side panel of the drive.
Continuous numbering
Drive for sliding doo system
Increasing power
2 2 0 3
.HB = Drive with holding brake
Contact
Manufactured
Initial
Commissioning
System No.
Sliding Door
System
TORMAX …………… .HERM
WT-299 e 3.18
DIN 18650-1:2010
N
e
x
t
S
e
r
v
i
c
e
2019
000/000/00
MM.YYYY
DD.MM.YYYY
Max Muster AG
Hauptstrasse 43 – 8049 Zürich
SERVICE: 043 827 33 55