QUICK REFERENCE − DECO 13A
en 300417 − 04/08 38
3. DOWNLOAD A PROGRAM
3.1 DOWNLOAD A PROGRAM OVER RS−232 CABLE
Preparatory steps on the PC
Actions Comments
1. Open program DNC−DECO V5
2. Click menu PORT/FLASH
3. Click menu SETUP
4. Check off ON PORT
5. Click OK
Preparatory steps on the machine
1. Press RESET
2. Set Mode Selector on MDI
3. Press once / twice OFFSET
SETTING to open the
OFFSET page.
4. Move cursor to I/O CHANNEL
5. Enter (RS 232 CABLE): 0
6. Press INPUT
To Next Page
Loading...
