tornos DECO 13a - Modifying Tool Position in Database

QUICK REFERENCE − DECO 13A
en 300417 − 04/08 53
5.8 MODIFYING TOOL SUPPORT POSITION IN DATA-
BASE
E.g.: To modify T31 in the machine database:ne data base
Actions Comments
Open Program Edit_BD V5
1. Click: Startup
2. Select: Programs
3. Select: DECO 2000 V5
4. Click: Edit_BD V5
Open machine data base from Window Edit−bd
1. Click: File
2. Click: Open
3. Select database: Machine No.
4. Click: Open
5. Double−click: Support
6. Click: Support 31
7. Double−click axis to modify,
e.g.:
Offset X
8. Enter value in: “setting box”
9. Click: OK
⇒ File ⇒ Save ⇒ File ⇒ Exit