QUICK REFERENCE − DECO 13A
en 300417 − 04/08 44
3.5 RESTORE OFFSETS
This function is particularly useful when a CONV 1 is necessary (adding a
tool).
With this function you can retrieve OFFSETS of the other tools.
Actions Contents
After loading the tables:
1. Press this softkey: (CONV. 1)
2. Press once / twice OFFSET
SETTING
(to open the OFFSET page).
3. Press this softkey:
4. Press this softkey: (RESTO)
Δ Attention !
After a CONV 1, no value must
be entered in OFFSET pages
before RESTOring offsets.
To Next Page
Loading...
