INSTALLATION – MULTIDECO 26/6 – MULTIDECO 32/6i
300381 en – 06/02 Chap. 1.3 /1
1. GENERAL
1.1 IDENTIFICATION OF THE MACHINE
⇒ Note:
Placed on the right side of the machine, this plate indicates primarily the
machine version number, to be quoted when contacting TORNOS ser-
vices.
Type
Series
Year
1.2 SAFETY MEASURES & DEVICES
These are described in the Instructions 300460 “SAFETY REGULATIONS”.
∆ Caution!
Failure to comply with the safety regulations
may cause serious accidents.
1.3 GENERAL CHARACTERISTICS
Data Characteristics
MULTIDECO
26/6
MULTIDECO
32/6i
Length 6035 mm 8300 mm
Width 1600 mm 1720 mm
Height (without indicator lamp) 1950 mm 2158 mm
Weight of machine equipped with
switch cabinet
13 axes: 8000kg
17 axes: 8500kg
19 axes: 9000kg
8300kg
Load per surface unit of floor approximately
12
daN/cm
2
approximately
12 daN/cm
2
⇒ Note :
For more details, consult your operating instructions entitled :
MACHINE EQUIPMENT.
⇒ Note :
For more details, consult your operating instructions entitled :
OPERATION & MAINTENANCE.
DIMENSIONS
– See chapter entitled ”Location/Installation”
To Next Page
Loading...
