g280284
Figure 1 1
1. CE/UKCA decal
3. Frame tube
2. Production year decal
• CE warning decal : Apply the CE warning
decal (Part Number 139-8321) over the existing
warning decal (Part Number 139-8320) on the
steering-wheel cover; refer to Figure 12 .
g235881
Figure 12
1. CE warning decal
1 1
Reducing the T ire Pressure
No Parts Required
Procedure
The tires are overinated at the factory for shipping
purposes. Reduce the pressure to the proper levels
before turning on the machine; refer to Checking the
T ire Pressure ( page 47 ) .
12
Mounting the Battery
Charger on a W all
Optional
No Parts Required
Procedure
Y ou can mount the charger on a wall using the
wall-mount key holes cut into the back of the unit. Use
screws that have a 6 mm (1/4 inch) diameter shaft
and a head diameter of 1 1 mm (0.45 inch).
Important: Survey your work area and determine
a location that best meets the criteria for safe and
effective operation of the charger .
13
Charging the Batteries
No Parts Required
Procedure
Charge the batteries; refer to Charging the Lithium-Ion
Batteries ( page 38 ) .
16