Toro 04591 - Daily Maintenance Checklist; Pre-Maintenance Procedures; Raising the Machine

Daily Maintenance Checklist
Duplicate this page for routine use.
For the week of:
Maintenance Check Item
Mon. T ues. W ed. Thurs. Fri.
Sat. Sun.
Check the safety-interlock
operation.
Check the instrument
operation.
Check the brake operation.
Check the tire pressure.
Check the reel-to-bedknife
contact.
Check the height-of-cut
adjustment.
T ouch-up damaged paint.
W ash the machine.
Notation for Areas of Concern
Inspection performed by:
Item Date
Information
Pre-Maintenance
Procedures
Raising the Machine
DANGER
Mechanical or hydraulic jacks may fail to support the machine and cause a serious injury .
• Use jack stands to support the raised machine.
• Use only mechanical or hydraulic jacks to lift the machine.
1. Position a jack at the desired jacking point ( Figure 35 ):
• Foot step on the left side of the machine
• Jack bracket on the right side of the machine
• Caster fork on the rear of the machine
41