Storing the Charger
1. Disconnect the power to the machine; refer
to Disconnecting or Connecting Power to the
Machine ( page 43 ) .
2. Disconnect the power supply cord from the
charger and coil it securely .
3. Examine the power supply cord thoroughly for
signs of wear or damage. Replace it if it is worn
or damaged.
4. Examine the charger thoroughly for worn, loose,
or damaged parts. T o repair or replace parts,
contact your authorized T oro distributor for
assistance.
5. Store the charger with the power supply cord in
a clean, dry place where it will not be bumped or
damaged and not exposed to caustic fumes.
54
To Next Page
Loading...
