decal139-8321
139-8321
Note: This machine complies with the industry standard
stability test in the static lateral and longitudinal tests with the
maximum recommended slope indicated on the decal. Review the
instructions for operating the machine on slopes in the Operator ’ s
Manual as well as the conditions in which you would operate the
machine to determine whether you can operate the machine in the
conditions on that day and at that site. Changes in the terrain can
result in a change in slope operation for the machine.
1. W arning—all operators
should read the Operator ’ s
Manual and be trained
before operating the
machine.
4. W arning; tipping
hazard—do not use on
slopes greater than 15°.
2. Thrown object
hazard—keep bystanders
away .
5. W arning—engage the
parking brake, shut of f
the machine, and remove
the key before leaving the
machine.
3. Cutting/dismemberment
hazard of hand;
cutting/dismemberment
hazard of foot—stay away
from moving parts; keep
all guards and shields in
place.
decal144-0275
144-0275
1. Batteries are ammable.
decal144-0277
144-0277
1. Positive terminal 4. Do not dispose improperly .
2. Read the Operator ’ s
Manual .
5. Do not expose to re.
3. Recycle the battery .
decal147-0287
147-0287
1. T orque to 2.82 to 3.16 N∙m (25 to 28 in-lb).
decal147-3125
147-3125
1. Keep the battery at
temperatures between 0°
to 45° C (32° to 1 13° F)
when charging; read the
Operator ’ s Manual .
2. W arning—read the
Operator ’ s Manual before
performing maintenance
and charging the battery;
with the main-power
connectors connected,
connect the charger to
the machine charging
connector and do not
engage the reels or
operate the machine;
disconnect the charger
to engage the reels and
operate the machine..
9
To Next Page
Loading...
Need help?
General
