Toro 30381 - Brake Maintenance; Adjusting the Parking Brake Interlock Switch

3.Aftertheradiatoristhoroughlycleaned,cleanout
debristhatmayhavecollectedinthechannelatthe
radiatorbase.
4.Closethehood.
BrakeMaintenance
AdjustingtheParkingBrake
InterlockSwitch
1.Stopthemachine,movethedeckliftswitchfullyinto
theneutral-lockedposition,settheparkingbrake,and
removetheignitionkey.
2.Removetheboltssecuringthefrontpanelandremove
thepanel(
Figure75).
1
2
G020875
Figure75
1.Bolts
2.Controlpanel
3.Loosenthe2jamnutssecuringtheparkingbrake
interlockswitchtothemountingbracket.
Figure76
1.Brake-shaftsensor
3.Parking-brake-interlock
switch
2.Jamnuts
4.5/32inch(3.9mm)
4.Movetheswitchupordownonthebracketuntilthe
distancebetweenthebrakeshaftsensorandtheswitch
plungeris5/32inch(3.9mm)(Figure76).
54