Toro 30695 - Brake Maintenance; Adjusting the Parking Brake Interlock Switch

BrakeMaintenance
AdjustingtheParkingBrake
InterlockSwitch
1.Stopthemachine,movethedeckliftswitchfullyinto
theneutral-lockedposition,settheparkingbrake,and
removetheignitionkey.
2.Removetheboltssecuringthefrontpanelandremove
thepanel(Figure41).
1
2
G020875
Figure41
1.Bolts
2.Controlpanel
3.Loosenthe2jamnutssecuringtheparkingbrake
interlockswitchtothemountingbracket.
Figure42
1.Brake-shaftsensor
3.Parking-brake-interlock
switch
2.Jamnuts
4.3.9mm(5/32inch)
4.Movetheswitchupordownonthebracketuntilthe
distancebetweenthebrakeshaftsensorandtheswitch
plungeris3.9mm(5/32inch)(Figure42).
Note:Makesurethatthebrake-shaftsensordoesnot
contacttheswitchplunger.
5.Securetheswitchjamnuts.
6.Testtheadjustmentasfollows:
A.Ensurethattheparkingbrakeisengagedandyou
arenotsittingontheseat,thenstarttheengine.
B.Movethecontrolleversoutoftheneutrallocked
position.
Theengineshouldstop.Ifnot,recheckthe
adjustmentyoumadetotheswitch.
7.Installthefrontpanel.
41