Toro 30881 - After Operation; After Operation Safety; Using the Cutting-Unit Storage Lanyard

AfterOperation
AfterOperationSafety
•Cleangrassanddebrisfromthecuttingunits,
mufers,andenginecompartmenttohelpprevent
res.Cleanupoilorfuelspills.
•Ifthecuttingunitsareinthetransportposition,use
thepositivemechanicallock(ifavailable)before
youleavethemachineunattended.
•Allowtheenginetocoolbeforestoringthemachine
inanyenclosure.
•Shutoffthefuelbeforestoringortransportingthe
machine.
•Neverstorethemachineorfuelcontainerwhere
thereisanopename,spark,orpilotlight,such
asonawaterheateroronotherappliances.
•Keepallpartsofthemachineingoodworking
conditionandallhardwaretightened,especially
blade-attachmenthardware.
•Replaceallwornordamageddecals.
UsingtheCutting-Unit
StorageLanyard
Usethecutting-unitstoragelanyardstopreventthe
forwardoutercuttingunitsfromsettlingwhenthe
machineisparkedovernightorifitisbeingstoredfor
anextensiveperiod.Youcanalsousethecutting-unit
storagelanyardstopreventthecuttingunitsfrom
oatingwhilethemachineistransportingbetween
mowingtasks.
g225484
Figure64
SecuringtheCuttingUnits
1.EnsurethatthePTOisdisengaged.
2.Parkthemachineonalevelsurface.
3.Engagetheparkingbrake.
4.Fullyraisethecuttingunits.
5.Alignthelanyardtothecarriershaftofthelift
armfortheforwardouter-cuttingunit(Figure65).
g225483
Figure65
1.Carrier-shaftgroove
(forwardouter-liftarm)
2.Lanyardloop
6.Sliptheloopinthelanyardoverthecarriershaft
untilthelanyardisfullyseatedinthegroovein
theshaft(Figure65).
7.Repeatsteps5and6fortheforward
outer-cuttingunitattheothersideofthe
machine.
Important:Removethelanyardsfromthecarrier
shaftsbeforeloweringthecuttingunits
StowingtheLanyards
Note:Stowthelanyardswhenyouarenotusing
them.
1.EnsurethatthePTOisdisengaged.
2.Parkthemachineonalevelsurface.
3.Engagetheparkingbrake.
48