Toro 30881 - Setup; Replacing the Warning Decal (CE Machines Only); Installing the Hood Latch (CE Machines Only)

Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Warningdecal1
Replacethewarningdecal(CE
machinesonly).
Hood-latchbracket1
Rivet2
Washer1
Screw(1/4x2inches)
1
2
Locknut(1/4inch)
1
Installthehoodlatch(CEmachines
only).
3
Nopartsrequired
–
Adjusttherollerscraper(optional).
4
Nopartsrequired
–
Installthemulchingbafe(optional).
5
Nopartsrequired
–
Preparethemachine.
MediaandAdditionalParts
Description
Qty.
Use
Operator'sManual
1
Reviewbeforeoperatingthemachine.
Engineowner’smanual1
Refertothemanualforadditionalmaintenanceinformation.
OperatorTrainingMaterial
1
Reviewbeforeoperatingthemachine.
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
1
ReplacingtheWarning
Decal(CEMachinesOnly)
Partsneededforthisprocedure:
1Warningdecal
Procedure
OnmachinesrequiringEuropeanCEcompliance,
replacingwarningdecalPartNo.112-5297with
warningdecalPartNo.127-6447(for4500series
machines)ordecalPartNo.127-6448(for4700
seriesmachines).
2
InstallingtheHoodLatch
(CEMachinesOnly)
Partsneededforthisprocedure:
1Hood-latchbracket
2Rivet
1Washer
1
Screw(1/4x2inches)
1
Locknut(1/4inch)
Procedure
1.Unhookthehoodlatchfromthehood-latch
bracket.
11