Toro 30881 - Hauling the Machine; Pushing or Towing the Machine

4.Withthecuttingunitslowered,sliptheloopof
thelanyardintotheslotinthereinforcement
plateoftherollersupport(Figure66).
g225485
Figure66
1.Reinforcement-plateslot
(rollersupport)
2.Lanyardloop
HaulingtheMachine
•Usecarewhenloadingorunloadingthemachine
intoatraileroratruck.
•Usefull-widthrampsforloadingthemachineinto
atraileroratruck.
•Tiethemachinedownsecurely.
PushingorTowingthe
Machine
Inanemergency,themachinecanbemoved
forwardbyactuatingthebypassvalveinthe
variable-displacementhydraulicpumpandpushingor
towingthemachine.
Important:Donotpushortowthemachine
fasterthan3to4.8km/h(2to3mph),because
youmaydamagethetransmission.Thebypass
valvesmustbeopenwheneveryoupushortow
themachine.
1.Openthehoodandlocatethebypassvalves
(Figure67)onthetopofpump,behindthe
batteryandstorageboxes.
g036666
g225685
Figure67
1.Bypassvalves
2.Rotateeachvalve3turnscounter-clockwiseto
openandallowtheoiltobypassinternally.
Note:Donotopenmorethan3turns.Because
uidisbypassed,youcanslowlymovethe
machinewithoutdamagingthetransmission.
3.Closethebypassvalvesbeforestartingthe
engine.
4.Torqueto70N∙m(52ft-lb)toclosethevalve.
Important:Topushortowthemachineinreverse,
youmustbypassthecheckvalveinthe4-wheel
drivemanifold.Tobypassthecheckvalve,
connectahoseassemblytothereversetraction
pressuretestport,locatedonthehydrostat,and
ontheportlocatedbetweenportsM8andP2on
thereartractionmanifold,whichislocatedbehind
thefronttire.Thehoseassemblyincludes1hose
(PartNo.95-8843),2couplerttings(PartNo.
95-0985),and2hydraulicttings(PartNo.340-77).
49