Toro 30881 - Changing the Hydraulic Fluid; Replacing the Hydraulic Filters

ChangingtheHydraulic
Fluid
ServiceInterval:Every800hours
Iftheuidbecomescontaminated,contactyourToro
Distributorbecausethesystemmustbeushed.
Contaminateduidlooksmilkyorblackwhen
comparedtocleanoil.
1.Parkthemachineonalevelsurface,engagethe
parkingbrake,lowerthemowerdecks,shutoff
theengine,andremovethekey.
2.Raisethehood.
3.Disconnectthecasereturnlinefromthebottom
ofthereservoirandletthehydraulicuidow
intoalargedrainpan.
4.Installthehosewhenthehydraulicuidstops
draining.
5.Fillthereservoirwithhydraulicuid;referto
CheckingtheHydraulic-FluidLevel(page73).
Important:Useonlythehydraulicuids
specied.Otheruidscouldcausesystem
damage.
6.Installthereservoircap.
7.TurnthekeyinthekeyswitchtotheONposition
tostarttheengine.Useallthehydrauliccontrols
todistributehydraulicuidthroughoutthe
system,andcheckforleaks.
8.TurnthekeyinthekeyswitchtotheOFF
position.
9.Checktheuidlevelandaddenoughtoraise
leveltheleveltotheFULLmarkonthedipstick.
Donotoverll.
ReplacingtheHydraulic
Filters
ServiceInterval:Aftertherst200hours
Every800hours
UseTororeplacementltersPartNo.94-2621for
therear(mowerdecks)ofthemachineandPartNo.
75-1310forthefront(charge)ofthemachine.
Important:Useofanyotherltermayvoidthe
warrantyonsomecomponents.
1.Tilttheoperator’sseattoaccessthemower
pressurelter;refertoAccessingtheHydraulic
LiftCompartment(page55)
g201858
Figure117
2.Replacethechargehydrauliclteratthe
hydraulicliftcompartmentasshowninFigure
118.
75