Toro 34230 - Spreader Maintenance; Emptying the Spreader

EmptyingtheSpreader
RemovingtheImpeller
1.Movethemachinetoalevelsurface,move
motion-controllevertotheNEUTRALposition,
shutofftheengine,waitforallmovingpartsto
stop,removekey,andengageparkingbrake.
2.Emptythehopperbyscoopingoutasmuchof
thematerialaspossible.
3.Removethe4thumbscrewsthatsecurethefront
cover(belowtheimpeller)tothechassis,and
removethecover(Figure32).
g033530
Figure32
1.Forwardcover3.Thumbscrew
2.Clipnut
4.Removethedrivepinthatsecuretheimpellerto
theshaftoftheimpellermotor,andremovethe
impellerfromtheshaft(Figure33andFigure
34).
g027324
Figure33
1.Drivepin3.Impeller
2.Shaft
g027325
Figure34
5.Placeashallowpanundertheshaftofthe
impellermotor(Figure34).
DisconnectingtheRate-GateLinkage
1.Pushthelockingsleeveforthegatecable
rearwardandliftthecableupfromtheballstud
oftherate-gatelinkage(Figure35).
30